Colleuse de boîtes de papier à grande vitesse

Plieuse colleuse automatique avec 4/6Corner

Modèle : LG800C (sauf système de colles en spray)

La plieuse-colleuse automatique de cartons (LG800) est une machine à volume élevé très stable qui peut apporter plus de bénéfices aux clients.

Il a une fonction d'angle 4/6. Chaque ensemble est commandé par un moteur indépendant. Il utilise ESC, PLC, des composants électroniques importés et trois-équipements de mode de suivi de carte.

Caractéristiques principales

1) L'ensemble de la machine adopte la structure de plaques d'acier découpées au laser-.

2) Système de pulvérisation de colle - (trois pistolets et trois capteurs) en option.

3) Les coursiers intérieurs de la machine sont ajustés par des moteurs.

4) Système plasma en option.

5) Les données de traitement des boîtes peuvent être enregistrées dans le système de contrôle informatique (facultatif).

6) Indicateur de position (facultatif)

7) Réglage variable.

8) Section de pré-longue-distance, pliage à 180 degrés pour la première ligne, pliage à 135 degrés pour la troisième ligne, ils s'ouvrent facilement après avoir été pré-pliés.

spécification:

Taille de papier

◆ straight line box WL: max 800800 mm min 9060 mm

◆ lock bottom box WL: max 700800 mm min 15060 mm

Nourrireuh

◆ MIKI-pulley infinite speed variator 1/set.

◆ Independent adjust feeding belt, ensure the smoothly paper feeding.1set/6pcs,size: 1026308mm

◆ Independent motor, inverter adjust speed, effectively ensure the balance of paper spacing.

◆ Paper carry rod with high performance Taiwan-made vibrating motor.

◆ Air feeding device.(optional)

Alignementunité

◆ Aligning the askew paper wihch from feeder, make sure the paper running in straight line.

◆ Alignment unit can be adjusted up and down, suitbale for different thickness paper stably.

◆ correct the paper, avoiding the paper going to two sides.

Deux ceintures : 2145344mm

Unité de pré-pliage

◆ 2 plate conveyor belt structure, segmenting left and right upper belt plate can be adjusted according to product demand, fast and efficient.

◆ three long top courier in this section, 180 degree folding could be preformed

Ceintures Nitta : 1 jeu

spécifications:1985243mm-2pcs 3375243mm-2pcs

5000444mm-1pcs 5000244mm-1pcs 4755304mm-1pcs

Blocage-de l'unité de verrouillage

◆ 3 plate conveyor belt board structure, segmental upper belt board function is the same as the prefolding part, eliminate the problems in the production of special-shaped box products effectively.

◆ The upper and middle belt board is detachable, depending on product requirements for disassembly and debugging.

◆ Nitta belts 1set /9 pcs

Spécification:

1985243mm-2pcs 3375243mm-1pcs

1780243mm-2pcs 3450244mm- 3pcs

3610304mm-1pcs

◆ Safety door (Optional)

Unité de collage

◆ The mechanical lower pasting cylinder is designed with separate type of rubber wheel and rubber cylinder, high speed, easy to clean and maintain.

◆ Crashlock, 4/6 corner box ,etc need to equip eletrical spray guns. (recommend 3 or more guns)

◆ width of gluing wheel 4MM (standard), other width could be customized

Unité de pliage

◆ 2 plate conveyor belt board structur.

◆ The left and right outside folding belt speed can be adjusted independently to ensure the molding accuracy.

◆ Wide box type can be matched with middle upper and lower belt plate to ensure stable transportation.

◆ Nitta belts 1set /8pcs

Spécification:

2785243mm-1pcs 4565243mm-1pcs

3175243mm-1pcs 7320344mm-3pcs

7520354mm-2pcs

Pressageunité

◆ Independend inverter adjust speed, proportional linkage to main engine under automatic model, adjusting separately with the same speed as the main engine under manual.

◆ Upper and lower belt telescopic adjustment is simple and easy to operate.

◆ Equipped with high speed electronic kick counter.

Unité de transport

◆ In automatic mode, the paper box spacing is set. The pressure belt speed is connected with the belt speed of the main engine in proportion. When photoelectric monitoring the paper box, the leather moves.

◆ In manual mode, the pressure belt is delivered at a constant speed, which is not affected by the machine speed.

◆ The pressure part adopts the pressure type pressing, the pressure control is more accurate, the product bonding effect is more guaranteed.

Fonction d'angle 4/6 (en option)

◆ All types and most sizes of 4/6 corner boxes can be quickly set up.

◆ the inclined frame according to the page size of the paper box adjustable.

◆ 45 degrees guide plate, suitable for all the size of the paper box.

◆ modular folding hook running track, high speed and high quality production.

Systèmes électriques et d'entraînement

◆ Schneider brand inverter is used to realize synchronous speed regulation of the main engine, making the speed change, adjustment, stability and reliability.

◆ Humanized design of hd touch screen, fully consider the operator's convenience.

◆ Schneider brand PLC is adopted, and a number of safety protection devices are added, making the operation of the machine more safe and reliable.

◆ Control panel, layout more reasonable, icon prompt, simple and easy to understand with remote control switch, make the operation more convenient.

Liste des pièces principales

1.Partie électrique

2.Ceinture

3.Pélément pneumatique

ÉCHANTILLONS DE BOÎTE

étiquette à chaud: colleuse de boîtes de papier à grande vitesse, Chine, fournisseurs, fabricants, usine, sur mesure, prix, en stock